Hot sale Middle Hollow force sensor-bransloadcell

Load Cells

Torque sensor

Pressure Sensor

Multi-Axis Sensor

piezoelectric sensor

Data Accqusition

Flange to Flange Reaction Torque Sensor(BTQ-903)

Specifications	Technique
Capacity	1,2,3,5,6,10, 20,30,50,100,150N.m
Rated output	1.5±10%mV/V
Zero balance	±2% F.S.
Non-linearity	0.1%F.S.
Hysteresis	0.1%F.S.
Repeatability	0.05%F.S.
Creep(30min)	0.1%F.S.
Temp.effect on output	0.05%F.S./10℃
Temp.effect on zero	0.05%F.S./10℃
Input impedance	410±20Ω
Output impedance	350±10Ω
Insulation	≥5000MΩ/100VDC
Recommended excitation	5~15V
Maximum excitation	20V
Compensated temp range	-10~60℃
Operation temp range	-20~80℃
Safe overload	120%F.S.
Ultimate overload	150%F.S.
Cable size	φ3×4000mm
Material	aluminum alloy
Weight approx.	0.2kg
IP Class	IP65

DOWN LOAD

INQUIRE

Product Description

1. Product Name:Flange to Flange Reaction Torque Sensor(B903)

2. Material: Aluminum Alloy

3. Capacity: 1,2,3,5,6,10, 20,30,50,100,150N.m

4. Features:

Easily integrates into OEM applications

Designed for Torque auditing

Flange to flange design, easy to install

Aluminum construction

Strain gauge based

6. Datasheet

Specifications	Technique
Capacity	1,2,3,5,6,10, 20,30,50,100,150N.m
Rated output	1.5±10%mV/V
Zero balance	±2% F.S.
Non-linearity	0.1%F.S.
Hysteresis	0.1%F.S.
Repeatability	0.05%F.S.
Creep(30min)	0.1%F.S.
Temp.effect on output	0.05%F.S./10℃
Temp.effect on zero	0.05%F.S./10℃
Input impedance	410±20Ω
Output impedance	350±10Ω
Insulation	≥5000MΩ/100VDC
Recommended excitation	5~15V
Maximum excitation	20V
Compensated temp range	-10~60℃
Operation temp range	-20~80℃
Safe overload	120%F.S.
Ultimate overload	150%F.S.
Cable size	φ3×4000mm
Material	aluminum alloy
Weight approx.	0.2kg
IP Class	IP65

5. Description:

The B903 Flange to Flange Reaction Torque Sensor can accommodate applications that include automotive braking, engine and transmission dynamometers, torque table, fastener testing, aircraft engine testing, and marine shaft torque measurements with shaft horsepower monitors. The B903 is available in both, aluminum and stainless steel construction and offers a unique solution for torque auditing applications. This particular Reaction Torque Sensor can be used to evaluate low-torque components and controls. Flange-reaction torque sensors measure small-reaction torque levels using flange-to-flange connections in-line with the component under test.

Need something special or a completely customized design? Contact BRANS to discuss your particular application requirements.