PF002B

Static parameters
1	Capacity	0~1/5/20/25KN
2	Charge sensitivity	～4pC/N
3	Overload capacity	200%F.S.
4	Non‐linearity	1%F.S.
5	Hysteresis	1%F.S.
6	Repeatability	1%F.S.
7	Capacitance	~20pF
8	Insulation resistance	>10¹²Ω
Dynamic parameters
9	Resonance frequency	>40kHz
10	Operating temperature range	-20~+80 ºC
Physical parameter
11	Weight	5.8g
12	Shell material	High-strength stainless steel
13	Installation	Through hole φ6.6
14	Sensitive material	Quartz
15	Output mode	Side L5 plug
16	Connecting cable	2m double-headed L5 low-noise cable

DOWN LOAD

INQUIRE

Product Description

Quartz piezoelectric force and strain sensors are highly reliable, and they have outstanding dynamic force and strain measurement characteristics. Typical measurements include dynamic and quasi-static forces during driving, compression, impact, impulse, reaction force and tension.

Since the measurement signal generated by the quartz sensor will decay over time, long-term static force measurement is not feasible. However, short-term or quasi-static measurements are advisable within a certain time limit, depending on the sensor and signal offset meter used..

Features
·strong and sturdy, small volume, high strength

·Detect small force changes under large static load

·Wide dynamic range

·Fast rise time

·Wide frequency range available
Application:
·Hemming, stamping and extrusion monitoring
·Mechanical installation force
·Mechanical impedance test
·Material testing
·Tablet presses and punches
·Roll Milling Machine
·Knife balance
·Limited Vibration

Static parameters
1	Capacity	0~1/5/20/25KN
2	Charge sensitivity	～4pC/N
3	Overload capacity	200%F.S.
4	Non‐linearity	1%F.S.
5	Hysteresis	1%F.S.
6	Repeatability	1%F.S.
7	Capacitance	~20pF
8	Insulation resistance	>10¹²Ω
Dynamic parameters
9	Resonance frequency	>40kHz
10	Operating temperature range	-20~+80 ºC
Physical parameter
11	Weight	5.8g
12	Shell material	High-strength stainless steel
13	Installation	Through hole φ6.6
14	Sensitive material	Quartz
15	Output mode	Side L5 plug
16	Connecting cable	2m double-headed L5 low-noise cable