0086-551-67295053 info@bransensor.com Mon-Sat: 8:30-18:00 Hefei City, Anhui Province, China

PRODUCT LISTHI, WHAT YOU NEED IS HERE. COME ON

Load Cells, Tension Force Sensors, Compression Force Sensors, Torque Sensors, Multi-axis Sensors, Pressure Sensors, Non-standard Sensors,Tension Dynamometers, Weighing Controlling Indicators, Force Displayers, Weighing & measuring Solutions

6 axis compression and torque force sensor with different capacity and size (B030XF)

Specifications Technique
Rated output 0.5 mV/
Zero balance ±2%F.S.
Non‐linearity 0.5%F.S.
Hysteresis 0.5%F.S.
Repeatability 0.3%F.S.
Creep(30min) 0.1%F.S.
Temp.effect on output 0.03%F.S./10ºC
Temp.effect on zero 0.03%F.S./10ºC
Input impedance 350±3Ω
Output impedance 350±3Ω
Insulation ≥5000MΩ/100VDC
Recommended excitation 10V
Maximum excitation 15V
Compensated temp range ‐10~40ºC
Operation temp range ‐20~60ºC
Safe overload 150%F.S.
Ultimate overload 200%F.S.
Cable size Φ5×3000mm
Weight approx. 0.8kg
Material aluminum alloy
IP Class IP66

Product Description

1. Introduction:
What is a Six-Axis Force/Torque Transducer?
A device that measures the outputting forces and torques from all three Cartesian coordinates (x, y, and z). A six-axis force/torque transducer is also known as a multi-axis force/torque transducer, multi-axis load cell, F/T sensor, or six-axis load cell.
 
The loads applied to a Brans sensor are quantified into six components. The diagram below shows the three forces and three moments that are measured as they are applied directly or indirectly (through an attached object) to the top surface of the sensor.
Forces Fx, Fy and Fz are the force components. The forces are named according to the axes of a conventional x, y, z-coordinate system. Each component is therefore looked at as positive or negative along the x, y and z axes. In the diagram, the arrows point toward the direction of positive or compressive force along each of the axes. Fx and Fy are the horizontal or shear force components. Looking at the connector, the Fx axis is oriented from right to left and the Fy axis is oriented from front to back away from the connector. Fz is the vertical force component and points down.
Moments Mx, My and Mz are the other three components. Moments are rotations around the same x, y and z axes and they follow the right hand rule.
Together the six components can be used to examine the complex forces being exerted upon the sensor.

This one can be modified or customized to meet your requirements. Similar to our entire multi-component load cell series, this model is manufactured in China and utilizes metal foil strain gauge technology.

The BRANS Multi-Axis Force/Torque Sensor system measures all six components of force and torque. It consists of a transducer, interface electronics and cabling.
Transducer
The compact and rugged monolithic transducer uses silicon strain gages to sense forces. The transducer's silicon strain gages provide high noise immunity and allow high overload protection, which is standard on all models.

2. Applications:  

  • Mainly used for force control in milling or grinding machine, rototic polishing and other industrial measuring system, production of high accuracy components, assembling; Measuring and controlling for all directions


3. Product Highlights:

(1) The F/T transducer is extremely rugged and durable. All transducer models can withstand high overload.
(2) High signal-to-noise ratio:  provide a signal 75 times stronger than conventional foil gages. This signal is amplified resulting in near-zero noise distortion.
(3) Prompt delivery  of standard F/T models.
(4) Custom F/T transducers  can be designed and built to your specifications.
Application assistance  by experienced engineers.

MODEL DESCRIPTION CAPACITY DIMENSTION(mm) MASS(kg)
FX, FY(N) FZ(N) MX,MY(Nm) MZ(Nm) OD Height ID
B0301F 6 Axi sensor 40 40 1.5 1.5 45 35 * 0.20
B0302F 6 Axi sensor 70 70 3 36 45 35 * 0.20
B0303F 6 Axi sensor 130 130 6 6 45 35 * 0.20
B0304F 6 Axi sensor 40 40 2.5 2.5 75 35 * 0.41
B0305F 6 Axi sensor 70 70 5 5 75 35 * 0.41
B0306F 6 Axi sensor 130 130 10 10 75 35 * 0.41
B0307F 6 Axi sensor 260 260 20 20 75 35 * 0.41
B0308F 6 Axi sensor 40 40 3.5 3.5 100 35 * 0.69
B0309F 6 Axi sensor 70 70 7 7 100 35 * 0.69
B0310F 6 Axi sensor 130 130 14 14 100 35 * 0.69
B0311F 6 Axi sensor 260 260 28 28 100 35 * 0.69

 

Specifications Technique
Rated output 0.5 mV/
Zero balance ±2%F.S.
Non‐linearity 0.5%F.S.
Hysteresis 0.5%F.S.
Repeatability 0.3%F.S.
Creep(30min) 0.1%F.S.
Temp.effect on output 0.03%F.S./10ºC
Temp.effect on zero 0.03%F.S./10ºC
Input impedance 350±3Ω
Output impedance 350±3Ω
Insulation 5000MΩ/100VDC
Recommended excitation 10V
Maximum excitation 15V
Compensated temp range 10~40ºC
Operation temp range 20~60ºC
Safe overload 150%F.S.
Ultimate overload 200%F.S.
Cable size Φ5×3000mm
Weight approx. 0.8kg
Material aluminum alloy
IP Class IP66

.

Send A Message

Email :

Message :

Code :

lf you have questions or suggestions, please leave us a message, we will reply you as soon as we can!

Innovative product

Flange to Flange Reaction Torque Sensor(BTQ-903B)

Read more +

Flange to Flange Reaction Torque Sensor(BTQ-903)

Read more +

Flange to Flange Reaction Torque Sensor(BTQ-404)

Read more +

Reaction Torque Sensor - Flange/Square Drive(BTQ-403)

Read more +

Reaction Torque Sensor With Shaft to Shaft Torque force measurement transducer (BTQ-402)

Read more +

Reaction Torque Force Sensors Transducers (BTQ-403)

Read more +

50Nm Disc torque sensor rotary torque sensor (BTQ-420P)

Read more +

50Nm -100kNm Big capacity Disc torque sensor rotary torque sensor 400Nm (BTQ-420P)

Read more +

Big capacity heavy duty shaft to shaft rotary torque sensor 2000Nm (BTQ-407)

Read more +

Quality Shaft to Shaft dynamic torque sensor 30Nm(BTQ-407)

Read more +

Non-Contact Shaft to Shaft Torque Sensor for Engine Motor Test 0-500nm (BTQ-408RTS)

Read more +

Non-contact Shaft to Shaft Rotary Torque Sensor with Build-in Display to Show Torque, Speed and Power (BTQ-408RTS2)

Read more +

Rotary Torque Sensor Dynamic Torque Sensor to Test Motors

Read more +

Shaft rotary torque force sensor (BTQ-407-D)

Read more +

Mini Capacity Rotary Torque Sensor - shaft to shaft with Encoder

Read more +

Rotary Torque Sensor - Non contact shaft to shaft with Encoder

Read more +