The S-type load cell is the most common load cell. It is mainly used to measure the tension and pressure between solids. It is also called tension pressure load cell. Because its shape is like an S shape, it is habitually called S-type load cell, the load cell is made of alloy steel material, sealed and protected by glue, easy to install, easy to use, suitable for electronic force measurement and weighing systems such as crane scales, batching scales, and machine-modified scales.

Electronic force measuring equipment    Tension&pressure measurement    

The load cell is based on the principle: the elastic body (elastic element, sensitive beam) produces elastic deformation under the action of external force, so that the resistance strain gauge (conversion element) pasted on its surface is also deformed. After the resistance strain gauge is deformed, its resistance The value will change (increase or decrease), and then the resistance change will be converted into an electrical signal (voltage or current) by the corresponding measuring circuit, thus completing the process of transforming the external force into an electrical signal.

Model：BR030, B313, B315, B315MT, B317, B317MD, B318, B318B, B320

It adopts S-shaped structure, which can be used in tension and compression; It adopts advanced sealing technology, and its sealing level reaches IP65. It can work in high humidity environments; it has strong anti-torsion, anti-side and anti-deflection capabilities. It has single-hole structure and double-hole structure; There are bending deformation structure and shear deformation structure. This type of load cell uses high-quality elastic steel and uses foil strain gauge technology. Make it have better linearity and repeatability. And stop the compensation for the sensor zero point and flexibility temperature influence, to ensure the long-term stability of the sensor.

The S" type load cell has excellent tensile and pressure symmetry, strong resistance to fatigue and partial load, good dust-proof, moisture-proof and waterproof performance, and is suitable for harsh environments. It is a commonly used force measurement in the industry. The sensor is suitable for the needs of two methods of force measurement, tension and compression. It has a single-hole structure and a double-hole structure; it has a bending deformation structure and a shear deformation structure. This type of sensor uses high-quality elastic steel and uses foil strain gauges. Process. It has good linearity and repeatability. It stops compensation for the influence of the sensor zero point and flexibility temperature, ensuring the long-term stability of the sensor.

 Tension&compression measurement of S-type offshore floating device

S-type spring force test